Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 113 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-63
Operation
Dial access (or press pre-programmed Flexible Feature Button) to the primary CO Line group for placing the
call. If this CO Line Group is unavailable another will be selected according to the Alternate Group
programming.
Conditions
a) When CO Lines in all groups are busy, busy tone will be heard and a busy message will be displayed in the
LCD.
b) A user may invoke callback to the first selected CO Line group by pressing the [
cbck
] button.
Default Settings
All CO Line Groups are set as follows for Alternate assignments:
CO Line Application – Alternate CO Line Group 1 is set to 0 (no alternate).
CO Line Application – Alternate CO Line Group 2 is set to 0 (no alternate).
CO Line Application – Alternate CO Line Group 1 and 2 – Delete Digits is set to 0 (delete nothing).
CO Line Application – Alternate CO Line Group 1 and 2 – Inserted Digits” is set to Empty (insert nothing).
Programming Abstract
•
Program the CO Group for an alternate route (via another group) if required.
•
Program the Alternate Route for digit insertion/deletion as required to place the dialed call over the selected
alternate route.
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
Program CO Line Groups for Alternate CO Line Groups (Index 07-01-xx-03, where “xx” = the CO Line
Group for which Alternate Routing must be setup):
•
Input 07-01-xx-03 to program Alternate Routing for CO Line Group “xx.”
•
Press [
save
]. This advances to Alternate CO Group.
•
Press [
show
]. The display shows
ALTER. CO GP :_
.
•
Input the Alternate Route to program (1 for first alternate, or 2 for second alternate) for this CO Line Group.
•
Press [
show
]. The display shows
CO GP NUMBER : x
. (Where “x” is the current programming, “0”
means no alternate route.
•
To change this Alternate Route selection, press [
chg
].
•
Input the CO Line Group that is to be used as the (1
st
or 2
nd
) Alternate Route for this CO Line Group.
•
Press [
save
].
•
Press [
next
] to advance to the Delete Digits for this Alternate Route selection.
•
If it is necessary to delete digits from the dialed digits when calls are routed to this alternate, put in the
number of digits to delete here.
•
Press [
chg
]. Input the quantity of digits to delete from the beginning of the number dialed. (0-9)
•
Press [
save
].