Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 177 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-127
•
Input the Source extension directory number.
•
Press
«
. The cursor advances to the next database item input area “Destination DIR No.”
•
Input the directory number of the Extension (if Individual) or Extension Pickup Group (if Group) for which the
source extension data is to be copied.
•
Press
«
. (Note: The copy is performed at this time. There is no “are you sure” prompt given.) When the
copy function is completed the cursor is positioned to accept another directory number for which to copy the
data again. Continue entering destination directory numbers,
Or…
•
Press the ESC (escape) key. At this time you may enter a new source extension directory number and
complete the process for another extension or group of extensions.
•
To exit this database-programming screen, press the ESC (escape) key again. You will see the prompt:
“ Exit This Feature ”; press “ Y ” for yes.
•
Continue making other programming changes or exit PC-DBA programming.
Note: changes made via PC-DBA are NOT updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming Guide section of this manual to learn more about
this procedure.
Extension Swapping
As part of the Flexible Numbering Plan in the DX-80 system, extension directory numbers (as defined in the database
programming) can be exchanged (swapped) from one port to another. This feature can be used to simplify moves
and changes of extensions at any specific location. When extension directory numbers are swapped from one port to
another, the associated programming is moved with the extension number.
Related Programming
Extension - DIR number Swapping, DSS Unit
Conditions
Extension directory numbers can only be swapped with valid (numbering plan defined) extension directory
numbers.
Programming Abstract
Use Extension Swapping (Directory Number Swapping) to exchange directory numbers of one extension
port with another extension port.
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input 01-101~156-22, then press [
save
]. This advances to the Directory Number Swapping screen.
•
Press [
show
].
•
Input the extension directory number that is to be assigned to this port, then press [
save
]. The new directory
number is now in operation on this port. The old directory number is now moved to the port where the new
number came from.
•
Press
the Hold button
to return to the previous menu level or press
the Volume button
to return to the DB
Item Selection screen or exit programming.