Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 272 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-222
SMDR information includes CO line used, extension number, time and date the call was placed, number dialed,
duration of the call, Ring Time to Answer, an account code if entered and a comment for special call handling record.
The system will also provide ring-in duration and call processing information relative to the call as it was handled by
the system.
In the case of incoming calls that are received with Caller ID (although this feature is a standard feature of the DX-80,
a telephone company subscription is required), two records are output. The first output record lists the telephone
number of the calling party as it is received from the telephone company. (Calls from CID blocked numbers will not
have a CID number associated with that record.) The second output record will show the callers name (“OUT OF
AREA” or “PRIVATE” may appear in this field if the calling party number is unavailable due to one of these reasons.)
In the SMDR example below all data fields are defined with the associated field width. Following the definitions are
sample records output from the SMDR port. (The two “
I ” records are one incoming call record received with caller
ID.)
0 1 2 3 4 5 6 7
12345678901234567890123456789012345678901234567890123456789012345678901234567890
D EXT TRK DGT_DIALED RING DATE TIME DURATION ACCOUNT
XXX XXX XXXX...XXXX MM:SS XX/XX HH:MM:SS HH:MM:SS XXXXXXXX
O 101 741 3035551212 00:00 01/01 01:05:52 00:00:35
I 103 740 4802224545 00:13 01/01 01:07:51 00:00:39
I 103 740 JOHNSON LARRY 00:13 01/01 01:07:51 00:00:39
O 101 741 3035551212 00:00 01/01 01:13:52 00:00:15 12345678
Data Field
D = Call Direction (I = Incoming, O = Outgoing)
EXT = Extension number/Incoming DISA CO line number/Incoming ECF CO line number
TRK = CO line directory number
DGT_DIALED = Telephone number (outgoing call only, maximum 16 digits, left aligned)
RING = CO Line incoming ringing duration before answer (Incoming call only)
MM = minute
SS = second
DATE = Day/Month (DD/MM)
TIME = Start time of call connection
MM = minute
HH = hour
SS = second
DURATION = Conversation time
MM = minute
HH = hour
SS = second
ACCOUNT = Account code entered for billing purposes (maximum 8 digits, left aligned)
A carriage return (CR) is generated after each record output.
Default Settings
Extension – SMDR Output is set to “ Y ” (yes). (Range is Y/N.)
Call Handling – SMDR Call Output – Outgoing Call is set to “Y.” (Range is Y/N.)
Call Handling – SMDR Call Output – Incoming Call is set to “N.” (Range is Y/N.)
Call Handling – SMDR Call Output – Account Code is set to “Y.” (Range is Y/N.)
System Resource – Modem & Serial Port – CIL X_Rate is set to “9600.” (Range is 1200/2400…19200.)
Programming Abstract
•
Set any extensions not to be recorded to “ N ” for the SMDR output.
•
Set the conditions for call logging as required. (Outgoing Calls and/or Incoming Calls)
•
Set the baud rate of the serial port to match the baud rate of the connected device.