manualshive.com logo in svg

Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 39 / 352

Поделиться
Скачать
Comdial DX-80 Скачать руководство пользователя страница 39

DX-80 I

NSTALLATION AND 

M

AINTENANCE 

M

ANUAL

P7290 IMM

2-9

Adding a DPM8 (Digital Port Module – 8 port)

Two DPM8 (Digital Port Module, 8-port) modules can be added to each KSU of the DX-80 system. These modules
expand the DX-80 system extension capacity to a maximum of 24 digital ports in each KSU (48 total digital ports).

DPM8’s are installed by connection to the 408M/E via the Extension Expansion module connectors (“J2” and “J3.”)

These connectors have the logical system address of 

SLOT 2

 and 

SLOT 3

 in both 

Cabinet 1

 (KSU1-408M) and

Cabinet 2

 (KSU2-408E).  (APM4 and DPM8 modules may be connected to the system via these two connectors.)

DPM8’s are installed using four (4), 2.0 cm brass color standoffs included with the DPM8 module.

DPM8 Extension Number Matrix Per Installed Location

KSU Connector Used

Extension Numbers in

KSU1

Extension Numbers in

KSU2

J2 Extension Expansion

109,110,111,112,

113,114,115,116

133,134,135,136,

137,138,139,140

J3 Extension Expansion

117,118,119,120,

121,122,123,124

141,142,143,144,

145,146,147,148

DPM8 Installation Procedure

1.  Be sure that the entire system is turned off.

2.  Remove the KSU cover (four screws at each corner).

3.  Connect grounded wrist strap to a suitable earth ground. (If a grounded wrist strap is not available, bleed

any static charge from your body before touching circuit modules by touching the gold-painted surface of the

inside of the KSU cabinet. If the KSU is properly grounded this will momentarily discharge static electricity
from your body. 

NOTE:

 A GROUNDED WRIST STRAP IS THE ONLY METHOD OF ASSURING THAT

STATIC ELECTRICITY DOES NOT DAMAGE CIRCUIT MODULES.)

4.  Remove the DPM8 module from the packaging and locate the four brass-color standoffs packaged with the

module.

5.  Position the DPM8 over the left-hand side of the 408M/E and any other extension modules already installed.

(When installing DPM8 modules, it is recommended that they be installed closest to the 408M/E. That is, if

DPM8

DPM8

J2  J3

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов