Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 136 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-86
Conditions
A CO Line that is marked as Dialing Type “Pulse” can be temporarily forced to Tone mode for use with
automated answering devices etc. using the Pulse to DTMF Conversion feature
*
.
Default Settings
All CO Lines are assigned to signal in DTMF (Tone) mode.
Programming Abstract
Program CO Lines for Pulse dialing or Tone (DTMF) dialing as required.
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input 02-ccc-07 (where “ccc” = the CO Line directory number to be programmed).
•
Press [
chg
] to select Tone or Pulse dialing mode.
•
Press
the Volume button
(up or down) to return to the DB Item Select screen to input a new CO Line
number.
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
•
Use
¢£¤¥
to highlight “CO Line.” Then press
«
.
•
Use
¢£¤¥
to highlight “Category 1.” Then press
«
.
•
Use
¢£¤¥
and
³´
to select CO Lines 1-8 or 9-16.
•
Use
¢£¤¥
to highlight the appropriate CO Line - Dialing mode.
•
Press
«
until the appropriate value displays.
•
Use
¢£¤¥
to highlight the next CO Line Dialing mode to change.
•
Repeat the programming process for all CO Lines.
•
When you have completed all changes, press the
°
(escape) key to exit this database programming
screen. You will see the prompt: “ Exit This Feature ”; press “ Y ” for yes.
•
You will then be prompted to “ Save Current Setting ?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “ File Exists, Override? ”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” (yes) to continue with the save operation.