Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 311 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-261
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input the code to go to the specific database item to change per the list:
06-01-01~24-03-01 (UCD Group “Members” where 01~24 is the group number.)
•
Press [
save
]. This advances to Member #1 of the new UCD Group selected.
•
Press [
chg
].
•
Input the extension directory of the digital channel to program into this Member. (At default the digital
channels of DX-80 Voice are 157, 158, 159, 160, 161, 162, 163, 164.)
•
Press [
save
].
•
Press [
next
].
•
Continue from [
chg
] above to program all Voice Mail channels as members of this UCD Group.
•
Press
the Hold button
to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
06-02-1~3-01 (Voice Mail Hunt Group, where 1~3 is the Tenant Group {usually “1”})
•
Press [
save
]. This advances to Voice Mail Table for Tenant 1 – Hunt Group.
•
Press [
chg
] until the UCD Group to be used as the VM Hunt Group displays. (New UCD Group
selected and programmed with digital channel Members.)
•
Press [
next
] to continue programming the various call handling digits (Prefix/Suffix).
•
Press
the Hold button
to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
Program UCD Group and Members:
•
Use
¢£¤¥
to highlight “Extension Application.” Then press
«
.
•
Use
¢£¤¥
to highlight “Uniform Call Distribution.” Then press
«
.
•
Input the UCD Group to program as the VM Hunt Group (usually 24). Then press
«
.
•
Use
¢£¤¥
and
³´
to highlight “Members.” Then press
«
.
•
Use
¢£¤¥
and
³´
to highlight the member to program. Then press
«
.
•
Input the digital channel directory number as this member of the VM UCD Group. Then press
«
.