Comdial DX-80 Скачать руководство пользователя страница 156 | Manualshive

Страница: 156 / 352

Comdial DX-80 Скачать руководство пользователя страница 156

DX-80 I

NSTALLATION AND

M

AINTENANCE

M

ANUAL

P7290 IMM

3-106

Operation

1. While the telephone is idle, press.

!;1

.

You hear the confirmation tone and the display indicates the current status.

TOUCH TONE ON

TOUCH TONE OFF

2. Momentarily the display returns to idle.

Direct Inward System Access (DISA) (

Optional AAM required

)

This feature allows you to remotely access system resources such as System Speed Dial, CO Line Access, and
Intercom dialing.

Any number of DISA lines may be assigned as incoming DISA access based on the system service mode (Day,

Evening).

DISA can be accessed via the Automated Attendant as well as by dedicated DISA lines.

Access to DX-80 system resources for out-calling is secured by means of verified passwords against the assigned
extension number. Use of system resources is accomplished only when a valid extension number has been entered
and when the password entered matches that stored for the extension number entered.

Related Features

Auto Attendant

System Speed Dial

Related Topics

All Intercom calling-related features

All CO Line calling-related features

Related Programming

Call Handling - DISA

Operation

1. Call into the DX-80 system from some remote location.

2. If answered by the Automated Attendant, press

9

to access DISA.

3. If the dialed number is a DISA line only – the line will automatically be answered after the Ring Time to

Answer timer has expired.

4. DISA dial tone is heard (stutter dial tone).

5. Dial an extension number, Hunt Group number, the Operator code. Ring-back tone is heard until the call is

answered.

Or…

5. Dial “#” + Extension Pa Extension “#.” If the extension number and password match,

authorized intercom dial tone is provided based on the entered extension number COS.

6. Dial a CO Line Group code or CO Line directory number to access a system CO Line to dial out.

7. Hang up when finished.

Conditions

a) Four DISA CO lines may be used simultaneously. If more than four DISA CO lines are signaling for answer,

the subsequent calls will receive internal busy tone.

«
...
154
155
156
157
158
...
»

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов