manualshive.com logo in svg

Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 203 / 352

Поделиться
Скачать
Comdial DX-80 Скачать руководство пользователя страница 203

DX-80 I

NSTALLATION AND 

M

AINTENANCE 

M

ANUAL

P7290 IMM

3-153

Related Features

Intercom Mode Selection

Intercom - Non Blocking

Operation

1.  Establish an intercom call to an extension in Voice Announce mode (Hands-free or Private). Your telephone

will display:

VOICE CALL  xx

msg

2.  Press 

*

 to change the alert signal at the called extension from Voice Announce to Tone Ringing.  Your

telephone will display:

CALLING STA 10

  cbck  msg

3.  A Tone Ringing alert signal is sent and continues at the called extension until answered.

4.  If your call remains unanswered, you may dial 

*

 again to return to Voice Call Announce mode.

Analog Ports (Single Line Telephones)

Dial 

*

 to tone ring an extension in Voice Announce mode.

Conditions

a)  It is not possible to force an extension from Tone Ring mode to Voice Announce mode if Tone Ring is the

mode they have selected.

b)  If you want to leave a Callback request at a called extension that doesn’t answer, the alert signal must be

set for Tone Ringing.

Headset Jack

All Digital Speakerphones have a standard 2.5 millimeter headset jack. This headset jack facilitates industry-standard
headset equipped with this jack type. Headset jack adapters are often available from headset manufacturers to adapt

your headset to the 2.5 mm jack.

A headset connected to the headset jack can be operated as an integral component of the DX-80 digital
speakerphone. Refer to Headset Mode for operation.

Related Features

Headset Mode

Headset Mode

!9/

All Digital Speakerphones have a standard 2.5 millimeter headset jack. When Headset Mode is selected (either by
pressing a preprogrammed headset feature key or dialing the Headset Mode code), the 

On/Off

 button is used to

activate/deactivate the headset.

While in Headset Mode, when the 

On/Off

 button is pressed, the extension status changes to an off-hook condition

with the headset active. When the 

On/Off

 button is pressed again, the extension status returns to idle (disconnecting

any call in progress.)

Related Features

Flexible Feature Button Programming

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов