manualshive.com logo in svg

Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 166 / 352

Поделиться
Скачать
Comdial DX-80 Скачать руководство пользователя страница 166

DX-80 I

NSTALLATION AND 

M

AINTENANCE 

M

ANUAL

P7290 IMM

3-116

Operation

1.  While you are connected on a call (CO Line or Intercom) someone transfers a CO Line to your extension,

ringing is heard to cancel ringing for this call, press 

!4

.

2.  Do Not Disturb – One is activated.

3.  DND will deactivate when the current call is disconnected.

Conditions

a)  The DND feature code may be programmed on a programmable feature button.
b)  A feature button programmed for the DND code will flash at a fast rate while DND – One Time is active.

Do Not Disturb – Override

DND – Override allows you to override the DND condition at another extension. This feature should be used with
some discretion since the extension in DND has invoked the feature for that purpose.

Related Features

Call Forward

Forced Intercom Call Forward

Intercom

Intrusion Active

Intrusion

Related Programming

Extension – 

Intrusion Active

Operation – Calling an Extension in Do Not Disturb (DND)

1.  Place intercom call to the extension in DND. DND tone is heard and the display indicates the condition of the

called extension:

EXT 103    DND

    override

2.  Press [

override

].

3.  The called extension rings.

Conditions

a)  An extension in DND that has been override will tone ring indicating the override.
b)  An extension in DND that has been override may invoked Forced Intercom Call Forward.
c)  The DND feature code may be programmed on a programmable feature button.
d)  A feature button programmed for the DND code will flash at a fast rate while DND – One Time is active.
e)  An extension must be programmed for the ability to Intrude upon an extension to operate this feature.  (See

Intrusion.)

End-To-End Signaling/Voice Mail Dialing Ratio

This feature allows Digital Speakerphone extensions to generate in-band DTMF tones while connected on ICM calls
to an on-site voice mail system and to ancillary devices connected to the External Page Port.

Related Features

Voice Mail

External Paging

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов