Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 197 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-147
f) Flexible Feature Buttons can be cleared of any feature code/directory number by pressing [
save
] before
entering a code/number.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
•
Use
¢£¤¥
to highlight “Feature Key Programming.” Then press
«
.
Program Extension Feature Buttons:
•
Use
¢£¤¥
to highlight “EXT’s Feature Keys.” Then press
«
.
•
Input the extension directory number then press
«
.
•
Use
¢£¤¥
to highlight the Flexible Feature Button that you wish to program then press
«
.
•
Choose DIR No. or FTR Access Key. (You also choose “NULL” which means nothing – to disable the
key operation.) Then press
«
.
•
Input the Feature Access Code or Directory number. Then press
«
.
•
Continue making other programming changes as required for this extension.
•
When you have completed all changes, press the
°
(escape) key to exit button programming for this
extension. This returns you to the previous menu level where you may enter another extension number
for which changes are to be made. Input the next extension number and press
«
.
Or…
•
Press the
°
(escape) key again. You will see the prompt: “ Exit This Feature ”; press “ Y ” for yes.
•
You will then be prompted to “ Save Current Setting ?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “ File Exists, Override? ”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” (yes) to continue with the save operation.
Program DSS Console Feature Buttons:
•
Use
¢£¤¥
to highlight “DSS Set.” Then press
«
.
•
Input the DSS Console number (1~12). Then press
«
.
•
Use
¢£¤¥
to highlight the Flexible Feature Button that you wish to program then press
«
.
•
Choose the DIR No. or NULL (to disable the key operation.) (It is not possible to program Feature
Access Codes on the DSS Console.) Then press
«
.
•
Input the Directory number. Then press
«
.
•
Continue making other programming changes as required for this extension.