Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 273 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-223
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays. (All database programming items are indexed for fast
access. Note: Press the volume up or down bar to return to the DB Item Select screen at any time.)
•
To program an extension for SMDR Output:
•
Input 01-101~156-19, then press [
save
]. This advances to the SMDR Output programming screen for the
extension selected.
•
Press [
chg
] to change this database item. Each time that [
chg
] is pressed the value changes.
•
Press the Volume button (up or down) to return to the DB Item Select screen.
•
To program the SMDR Call Output – Outgoing Call:
•
Input 03-30-01, then press [
save
]. This advances to the SMDR Output selection for Outgoing Calls.
•
Press [
chg
] to change this database item. Each time that [
chg
] is press the value is changed.
•
Press [
next
] to advance to SMDR Call Output – Incoming Call or press the Volume button (up or down) to
return to the DB Item Select screen.
•
To program the SMDR Call Output – Incoming Call:
•
Input 03-30-02, then press [
save
]. This advances to the SMDR Output selection for Incoming Calls.
•
Press [
chg
] to change this database item. Each time that [
chg
] is press the value is changed.
•
Press
the Hold
button to exit this programming and return to the previous menu level or press the Volume
button (up or down) to return to the Database Item Select screen.
•
To program the SMDR Call Output – Account Code:
•
Input 03-30-03, then press [
save
]. This advances to the SMDR Output for Account Codes.
•
Press [
chg
] to change this database item. Each time that [
chg
] is press the value is changed.
•
Press
the Hold
button to exit this programming and return to the previous menu level or press the Volume
button (up or down) to return to the Database Item Select screen.
•
To program the (CIL) Call Information Log serial port baud rate ( CIL X_RATE ):
•
Input 04-16, then press [
save
]. This advances to the SMDR CIL port transmission rate setting.
•
Press [
chg
] until the appropriate value displays.
•
Press
the Hold button
to exit this programming and return to the previous menu level or press the Volume
button (up or down) to return to the Database Item Select screen.
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory, then press Enter.
•
Press any key at the program title page (as requested) to enter the Main Menu.
•
Select PC-DBA from the Main Menu.
•
Select “Programming” from the PC-DBA Menu. The Database Programming menu is now displayed.
•
To program an extension for SMDR Output:
•
Use the cursor positioning arrows to highlight “Extension” and then press Enter.