Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 286 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-236
Related Programming
Call Handling - XFR_I Recall, XFR_B Recall
Operation – Unsupervised Transfer
1. While connected to a call (CO Line or intercom extension):
a. Press
the Transfer button
.
b. Dial the destination directory number where this call is to be transferred (extension, UCD Group, Virtual
Number, etc.)
Or...
a. Press the feature button programmed for the destination directory number.
2. Hang up (go on-hook) to complete the transfer.
Operation – Supervised Transfer
1. While connected to a call (CO Line or intercom extension):
a. Press
the Transfer button
.
b. Dial the extension destination directory number where this call is to be transferred.
Or...
a. Press the feature button programmed for the destination extension number.
2. Wait for the called extension to answer the intercom call. Announce the transfer.
3. Hang up (go on-hook) to complete the transfer.
Analog Ports (Single Line Telephones)
1. While connected on a call (CO Line or intercom extension), press {FLASH} (hook switch flash).
2. When you hear dial tone, dial the destination to which you want to transfer the call (extension, UCD Group,
Virtual Number, etc.).
3. To screen the call, wait for the called extension to answer. Otherwise, hang up to complete the transfer.
Conditions
a) Transferred CO Lines that recall are placed on system hold at the time the recall occurs.
b) When a transferred CO line recalls, the line number and extension number where the call was transferred
will be displayed.
c) The transferred connection party will hear ring-back tone while the call is transfer ringing.
d) CO Line calls and intercom calls may be transferred.
e) In screened transfer, if the destination extension answers your intercom call in Voice Announce Hands-free
mode and does not go off hook, the transferred connection will transfer ring at that extension.
f) In screened transfer, if the destination extension answers your intercom call by lifting the handset, the
transferred connection is connected to the destination extension immediately when the transfer operation is
complete.
Default Settings
Call Handling – XFR_I Recall (Transfer – Idle Recall) is set to “30” seconds.
(Range is 16/30/60/90/120 seconds.)
Call Handling – XFR_B Recall (Transfer – Busy Recall) is set to “60” seconds.
(Range is 16/30/60/90/120 seconds.)
Programming Abstract
Program the recall time for calls that are transferred to an Idle Extension and for calls that are transferred to
a Busy Extension.