Comdial DX-80 Скачать руководство пользователя страница 139 | Manualshive

Страница: 139 / 352

Comdial DX-80 Скачать руководство пользователя страница 139

DX-80 I

NSTALLATION AND

M

AINTENANCE

M

ANUAL

P7290 IMM

3-89

Call Handling – Talk Abandon Time
Call Handling – Meet Me Conference Talk Time
Call Handling – Conference Tone
System Application – Meet Me Conference Directory Number

Operation – Transfer a Caller to a Meet Me Conference

1. While connected to another extension or CO Line, press the Transfer button.

2. Dial the Meet Me Conference location where this party is to be connected (390-397).

3. Hang up to complete the transfer.

Analog Ports (Single Line Telephones)

1. While connected to another extension or CO Line, momentarily press the hook-switch (or press the FLASH

button).

2. Wait for dial tone; then dial the Meet Me Conference (390-397)

3. Hang up to complete the transfer.

Operation – Join a Meet Me Conference

1. Dial the Meet Me Conference location that you wish to join (390-397).

2. Hang up when finished.

Operation – Join a Meet Me Conference from the Auto Attendant

1. When answered by the DX-80 system automated attendant, dial the Meet Me Conference location that you

wish to join (390-397).

2. Hang up when finished.

Conditions

a) It is highly recommended that the all CO Lines be set at the factory default for Call Abandon (“Y”) to optimize

Meet Me Conference functionality.

b) When Call Abandon is set to “N” for any CO Line, you must set the Meet Me Conference Talk Time to some

value other than 0. This is the only facility that will allow the CO Line to be disconnected if Call Abandon is
No.

c) Up to four simultaneous connections may join any one conference.
d) Up to eight simultaneous conferences may be established at any one time.

Default Settings

Call Handling – Meet Me Conference Talk Time is set at 0 (unlimited).
(Range is: 0-120 minutes, in 10-minute increments.)
Call Handling – Conference Tone is set to “Y” (yes). (Range is: Y/N.)
Call Handling – CO Line Conference = 3 Lines. (Range is None/2/3.)

Programming Abstract

•

See “System Application – Meet Me Conference” for Directory Number programming

•

See “CO Line Loop Supervision” for CO Line – Call Abandon programming

•

See “CO Line Loop Supervision” for Call Handling – Talk Abandon Time

•

Program Call Handling – CO Line Conference for none/2/3 lines.

•

Program Call Handling – Meet Me Conference Talk Time to limit conference time for CO Lines involved in
conference calls. (Required when Call Abandon is “N” for any CO Line.)

•

Program the Call Handling – Conference Tone for Yes/No operation.

«
...
137
138
139
140
141
...
»

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов