
DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-37
•
Program the extension to be assigned the system Attendant for each of the tenant groups.
•
Program the extension to be assigned the system Alternate Attendant for each of the tenant groups.
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
Program Operator Code (Index 08-09-14):
•
Input:
•
08-09-14-01
to program
Operator Code – Length
(the length of this code may be 1-4 digits).
Or…
•
08-09-14-02 to program the Operator Code – Leading Digit.
•
Press [
save
]. This advances to the selected database item.
•
Press [
chg
] to change the contents of this database item.
•
For Length: press [
chg
] until the appropriate number of digits to dial for the operator code displays.
•
For Leading Digit: input the actual code necessary for the attendant.
For example, if Length is set to “1,” the entire code is the “Leading Digit” (typically “0.”) If the “Length” is “2,”
the resulting code will be two digits. The “Leading Digit” may be input as a single digit or both digits. See the
table below for some examples:
Length
Leading
Resulting Code
Comments
1
0
0
Usual assignment. Users dial “0” to reach the
system attendant.
2
0
00
System assigns the second digit beginning with
0 since no digit was input for the second digit.
Users dial “00” to reach the system attendant.
4
0123
0123
All digits for the four digit long code are input.
Therefore the code is fixed to the input digits.
Users dial “0123” to reach the system attendant.
•
Press [
save
].
•
Press (volume up or down) to return to the DB Item Select screen. Or… use the [
back
] or [
next
] button to
skip to the appropriate database item.
Program Operator Extension (Index 04-02):
•
Press the
Volume
button (up or down) to return to the DB Item Select screen.
•
Enter
04-02-1-01
then press [
save
]. The Attendant for Tenant Group 1 displays.
•
Press [
chg
] to change the contents of this database item.
•
Input the appropriate extension number that will serve as the Attendant for this tenant group.
•
Press [
save
].
•
Press [
next
], the DSS console(s) assigned to operate with the extension are displayed. (Note: These are
display information only and cannot be changed in this programming parameter).
Содержание DX-80
