Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 160 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-110
Conditions
a) 12 maximum DSS Consoles can be assigned in the DX-80 system.
b) DSS Consoles can be programmed with numbering plan directory numbers only (no Feature access codes
can be programmed on DSS Console buttons.)
Default Settings
System Resource – DSS Allocation – No ports assigned as DSS Consoles, no ports assigned as DSS
Console Owner extensions. (Range: any valid extension port Directory Number.)
Feature Key Programming – reference the Specifications section of this manual to review the default map of
DSS Console buttons.
Programming Abstract
•
Program the associated digital port as a DSS Allocations – DSS Dir Number.
•
Program the digital extension as the DSS Console Owner.
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
Program DSS Owner (04-14-1-01~12):
•
Input 04-14-1-01~12, then press [
save
]. This advances to the DSS Allocation programming screen for the
DSS Console selected (1~12).
•
Press [
save
]. This advances to the DSS Owner screen and displays the current contents.
•
Press [
chg
] to change the DSS Owner (the extension for which this DSS is to operate).
•
Input the extension and then press [
save
].
•
Press [
next
] to advance to the next data item, DIR NUMBER .
•
Press [
chg
] to change/enter the digital port directory number where the DSS is connected.
•
Input the directory number of the digital port where the DSS Console is connected, then press [
save
].
•
Press [
save
].
•
Press [
next
] to enter more DSS Console data.
•
Input the next DSS Unit number (1~12) to program.
•
Press [
show
].
•
Follow the convention above for all DSS Console programming.
•
Press the Hold button to exit DSS Allocation programming and return to the previous menu level.
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.