Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 142 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-92
Operation – Establish a Three-Party Conference
1. Answer or place the first call connection (internal or external) that will become part of the conference.
2. Press
the Hold button
.
3. Place the second call (internal or external).
4. Press the Conference button. The connections are joined together.
5. Hang up to end the Conference.
Analog Ports (Single Line Telephones)
1. While on a call, press {FLASH} (hook-switch flash).
2. Make a second call.
3. Press {FLASH} (hook-switch flash) and then dial
3
.
Operation – Establish a Four-Party Conference
1. First establish a three-party conference (per above).
2. Press
the Hold button
.
3. Place the third call (internal or external).
4. Press
the Conference button
. The connections are joined together.
(Four parties include the initiator {Controller} of the conference.)
5. Hang up to end the Conference.
Operation – Establish an Unsupervised Conference
1. First establish a conference (per above) with two or three CO Lines.
2. Press
!77
.
3. The Unsupervised Conference is established and your extension returns to idle.
Operation – Rejoin an Unsupervised Conference
1. Press
!77
.
2. Your extension is rejoined to the conference connection.
Operation – Forcedly Release a Conference Member (Conference Controller Only)
1. While engaged in a conference the display shows:
XXX XXX XXX
private forced
2. Press [
forced
]
PRESS DIR#
exit
3. Press [
exit
] to abort the operation and return to the conference.
Or…
Dial the directory number (CO Line number or Extension number) to release. (You may also simply press
the CO Line button or DSS button of the CO Line/extension to be released.)
That conference member is disconnected and you are rejoined in conference with the remaining members.
4. Hang up to end the Conference.