Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 287 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-237
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays. (All database programming items are indexed for fast
access. Note: Press the volume up or down bar to return to the DB Item Select screen at any time.)
•
Input 03-10, then press [
save
]. This advances to the Transfer-Idle Recall programming screen.
•
Press [
chg
] until the appropriate value for this data item displays.
•
Press [
next
] to advance to the next data item or exit programming.
Or…
•
Input 03-11, then press [
save
]. This advances to the Transfer-Busy Recall programming screen.
•
Press [
chg
] until the appropriate value for this data item displays.
•
Press [
next
] to advance to the next data item or exit programming.
•
Press
the Hold button
to exit DISA programming and return to the previous menu level.
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
Program extensions into the tenant group:
•
Use
¢£¤¥
to highlight “Call Handling” and then press
«
.
•
Use
¢£¤¥
to highlight “Category 1” and then press
«
.
•
Use
¢£¤¥
to highlight “XFR_I Recall” or “XFR_B Recall” as necessary for change.
•
Press
«
until the appropriate value displays.
•
When all changes are made press the
°
(escape) key to exit this database programming screen. You will
see the prompt: “Exit This Feature”; press “ Y ” for yes.
•
You will then be prompted to “Save Current Setting?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “File Exists, Override?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” (yes) to continue with the save operation.
•
Press
°
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.