Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 314 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-264
Default Settings
Extension – Warning Tone = N (Range is Y/N.)
Extension – Drop Call In = N (Range is Y/N for each extension.)
Extension – Drop Call Out = N (Range is Y/N for each extension.)
Call Handling – Warning Time – Outgoing Call = 5 (Range is 1~30 minutes.)
Call Handling – Warning Time – Incoming Call = 5 (Range is 1~30 minutes.)
Programming Abstract
•
Determine which extensions are to be limited and for what type of call (incoming or outgoing). Then program
those extensions for the appropriate operation: Warning Tone only or Drop Call In/Out.
•
Program the time period for the appropriate mode(s).
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
Program the extension for the appropriate mode
•
Input 01-101~156-08 for Warning Tone (101~156 is the extension to program.)
•
Input 01-101~156-09 for Drop Call Out (101~156 is the extension to program.)
•
Input 01-101~156-10 for Drop Call In (101~156 is the extension to program.)
•
Press [
chg
] until the appropriate value (Y/N) displays.
•
Press [
back
] or [
next
] to select the previous/next DB Item or press the Volume button (up or down) to
return to the DB Item Select screen or exit programming.
Program Warning Time
•
Input 03-09-01 for Warning Time Outgoing
•
Input 03-09-02 for Warning Time Incoming
•
Press [
chg
] until the appropriate time displays
•
Press
the Hold button
to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
Program extensions for the appropriate Call Limiter
•
Use
¢£¤¥
to highlight “Extension.” Then press
«
.
•
Use
¢£¤¥
to highlight “Category 2.” Then press
«
.