Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 194 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-144
Operation
While connected to a PBX Line, press
!3
. The programmed hook-flash is invoked on the connected
PBX circuit.
Conditions
a) The Flash code may be stored in any speed dial location.
b) The Flash code may be stored in the Last Number Redial buffer. When you activate redial, a Digital
Speakerphone display will show a “/” to indicate the Flash code.
c) The Flash time is programmable from 100ms to 1500ms in increments of 100ms (1/10th of a second).
d) At a Digital Speakerphone, when the flash code is dialed “PBX Flash” will be displayed temporarily.
e) Single line extensions must generate a hook-flash on the analog port, then dial
!3
to generate a hook-
flash on a PBX Line.
Default Settings
Call Handling – PBX Flash Time is set at “0.6.” (Range is: 0.1-3.0 seconds.)
Programming Abstract
Program the required PBX Flash Time (applies to all CO Line of Type “PBX.”)
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input 03-03, then press [save]. This advances to PBX Flash programming.
•
Press
the Hold button
to return to the previous menu level or press
the Volume button (up or down)
to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
•
Use
¢£¤¥
to highlight “Call Handling.” Then press
«
.
•
Use
¢£¤¥
to highlight “Category 1.” Then press
«
.
•
Use
¢£¤¥
to highlight “PBX Flash.”
•
Press
«
until the appropriate value displays.
•
When you have completed all changes, press the
°
(escape) key to exit this database programming
screen. You will see the prompt: “ Exit This Feature ”; press “ Y ” for yes.
•
You will then be prompted to “ Save Current Setting ?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.