Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 267 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-217
System Application - Individual Speed Number
System Application - System Speed Number
Operation – Setting up Extension Speed Dial Numbers
1. Press
!1
.
2. Dial the Speed Dial location number (470~489).
3. Press [
show
]. The current contents of this speed dial number location are displayed.
4. Press [
chg
].
5. Input the number for this speed dial location including Pauses (
!70
), Flash (
!3
) and Pulse To
Tone Conversion (
*
) codes.
6. Press [
save
]. That number is stored in this speed dial location.
7. Continue programming speed dial locations from step 2 above or hang-up (press
the On/Off button
twice)
to exit.
Analog Ports (Single Line Telephones)
1. Dial
#1
.
2. Dial the Speed Dial location number (470~489).
3. Input the telephone number.
4. Press {FLASH} (hook-switch flash).
Operation – Setting up System Speed Dial Numbers
1. Use Database Administration (see Programming below)
Or...
2. Use Attendant Administration (see Attendant Administration.)
Operation – System Automatically Selects the CO Line
1. Dial the Speed Dial location number (470-489, 500-699).
2. That speed dial number is dialed on any available CO Line.
Operation – You Select the CO Line
1. Press the appropriate CO Line button (or dial the CO Line directory number 740-755).
2. Press
!1
.
3. Dial the Speed Dial location number (470-489, 500-699).
4. That speed dial number is dialed on the selected CO Line.
Conditions
a) The DX-80 system has 1000 speed dial number memory locations that are dynamically allocated to the
system use (extensions individually via Extension Speed Dial Locations or all extensions system wide via
System Speed Dial Locations).
b) Only a Digital Speakerphone can program System Speed Dial bins using Attendant Administration.
c) Speed bins may be chained.
d) Pauses and Flashes may be stored in Speed Dial.
e) Chaining, Pauses and Flashes each occupy one character position.
f)
If you access an empty bin the display will show “SPEED NO. EMPTY.”