Yamaha YZ250(W)/W1, Owner'S Service Manual

Page: 462 / 596

5-46
CHAS
HANDLEBAR
NOTE:
9 The handlebar holder (upper) should be
installed with the punched mark
a
forward.
9 Install the handlebar so that the marks
b
are in
place on both sides.
9 Install the handlebar so that the projection
c
of
the handlebar holder (upper) is positioned at the
mark on the handlebar as shown.
9 First tighten the bolts on the front side of the
handlebar holder (upper), and then tighten the
bolts on the rear side.
4. Install:
9
Grip (left)
1
Apply the adhesive to the handlebar
2
.
NOTE:
9 Before applying the adhesive, wipe off grease
or oil on the handlebar surface
a
with a lac-
quer thinner.
9 Install the grip (left) to the handlebar so that the
line
b
between the two arrow marks faces
straight upward.
3. Tighten:
9 Nut [handlebar holder (lower)]
1
40 Nm (4.0 m•kg, 29 ft•lb)
1P8-9-32-5c 4/10/06 4:42 PM Page 10