5-34
CHAS
FRONT FORK
5. Measure:
9
Oil level (left and right)
a
Out of specification
→
Adjust.
Standard oil level:
145~148 mm (5.71~5.83 in)
From top of fully stretched
damper assembly.
6. Tighten:
9
Locknut
1
NOTE:
Fully finger tighten the locknut onto the
damper assembly.
7. Loosen:
9
Compression damping adjuster
1
NOTE:
9
Loosen the compression damping adjuster fin-
ger tight.
9
Record the set position of the adjuster (the
amount of turning out the fully turned in posi-
tion).
8. Install:
9
Base valve
1
To damper assembly
2
.
NOTE:
First bring the damper rod pressure to a maxi-
mum. Then install the base valve while releas-
ing the damper rod pressure.
9. Check that the damper assembly is fully
stretched.
Not fully stretched
→
Repeat the steps 2 to 8.
1P8-9-32-5b 4/5/06 4:24 PM Page 18
Summary of Contents for YZ250(W)/W1
Page 78: ...2 11 MAINTENANCE SPECIFICATIONS SPEC MEMO...
Page 594: ...TUN MEMO...
