Yamaha YZ250(W)/W1, Owner'S Service Manual

Page: 458 / 596

5-44
CHAS
HANDLEBAR
EC5B3000
REMOVAL POINTS
EC5B3100
Master cylinder
1. Remove:
9 Master cylinder bracket
1
9
Master cylinder
2
c C
9 Do not let the master cylinder hang on the
brake hose.
9 Keep the master cylinder cap side horizontal
to prevent air from coming in.
EC5B3200
Grip
1. Remove:
9 Grip
1
NOTE:
Blow in air between the handlebar or tube guide
and the grip. Then remove the grip which has
become loose.
EC5B4000
INSPECTION
EC5B4100
Handlebar
1. Inspect:
9 Handlebar
1
Bends/Cracks /Damage
→
Replace.
w
Do not attempt to straighten a bent handlebar
as this may dangerously weaken the handlebar.
EC5B5000
ASSEMBLY AND INSTALLATION
EC5B5100
Throttle assembly
1. Install
9 Grip (right)
1
Apply the adhesive on the tube guide
2
.
NOTE:
9 Before applying the adhesive, wipe off grease
or oil on the tube guide surface
a
with a lac-
quer thinner.
9 Align the mating mark
b
on the grip (right) with
the slot
c
in the tube guide.
1P8-9-32-5c 4/10/06 4:42 PM Page 6