Yamaha YZ250(W)/W1, Owner'S Service Manual

Page: 414 / 596

5-22
CHAS
FRONT BRAKE AND REAR BRAKE
2. Install:
9 Brake hose holder
1
9 Bolt (brake hose holder)
2
3. Install:
9 Brake hose holder
1
9 Nut (brake hose holder)
2
NOTE:
Align the top
a
of the brake hose holder with the
paint
b
of the brake hose.
10 Nm (1.0 m•kg, 7.2 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
4. Install:
9 Pin
1
9 Plain washer
2
9 Cotter pin
3
NOTE:
After installing, check the brake pedal height.
Refer to “REAR BRAKE ADJUSTMENT” section
in the CHAPTER 3.
EC5A5911
Front brake hose
1. Install:
9 Copper washer
1
9 Brake hose
2
9 Union bolt
3
w
Always use new copper washers.
c C
Install the brake hose so that its pipe por-
tion
a a
directs as shown and lightly touch-
es the projection
b b
on the caliper.
30 Nm (3.0 m•kg, 22 ft•lb)
1P8-9-32-5a 4/10/06 4:40 PM Page 44