Yamaha YZ250(W)/W1, Owner'S Service Manual

Page: 460 / 596

2. Install:
9 Handlebar
1
9 Handlebar holder (upper)
2
9 Bolt [handlebar holder (upper)]
3
5-45
CHAS
HANDLEBAR
2. Install:
9 Grip cap (upper)
1
9 Grip cap (lower)
2
9 Bolt (grip cap)
3
NOTE:
Temporarily tighten the bolts (grip cap).
EC5B5210
Handlebar
1. Install:
9 Handlebar holder (lower)
1
9 Plain washer
2
9 Nut [handlebar holder (lower)]
3
NOTE:
9
Install the handlebar holder (lower) with its side
having the greater distance
a
from the mount-
ing bolt center facing forward.
9
Apply the lithium soap base grease on the
thread of the handlebar holder (lower).
9
Installing the handlebar holder (lower) in the
reverse direction allows the front-to-rear offset
amount of the handlebar position to be
changed.
9
Do not tighten the nut yet.
28 Nm (2.8 m•kg, 20 ft•lb)
1P8-9-32-5c 4/10/06 4:42 PM Page 8