Raritan PX3-1000 series, User Manual, Page: 56 / 744

Chapter 3: Initial Installation and Configuration
34
To set or
enable Use this command
IP address
returned by
the DNS
server
network dns resolverPreference
<resolver>
<resolver> = preferV4 or preferV6

Static IP configuration:
To set Use this command
Static IPv4 or
IPv6 address
network <ipvX> interface <ETH>
address <ip address>
<ip address> = static IP address, with a
syntax similar to the example below.

Example:
192.168.7.9/24
Static IPv4 or
IPv6 gateway
network <ipvX> gateway <ip
address>
<ip address> = gateway's IP address
IPv4 or IPv6
primary DNS
server
network dns firstServer <ip
address>
<ip address> = DNS server's IP
address
IPv4 or IPv6
secondary
DNS server
network dns secondServer <ip
address>
<ip address> = DNS server's IP
address
IPv4 or IPv6
third DNS
server
network dns thirdServer <ip
address>
<ip address> = DNS server's IP
address