Chapter 8: Using the Command Line Interface
495
config:#
sensor outlet <n> <sensor type> upperCritical <option>
Set the Upper Warning threshold for an outlet sensor:
config:#
sensor outlet <n> <sensor type> upperWarning <option>
Set the Lower Critical threshold for an outlet sensor:
config:#
sensor outlet <n> <sensor type> lowerCritical <option>
Set the Lower Warning threshold for an outlet sensor:
config:#
sensor outlet <n> <sensor type> lowerWarning <option>
Set the deassertion hysteresis for an outlet sensor:
config:#
sensor outlet <n> <sensor type> hysteresis <hy_value>
Set the assertion timeout for an outlet sensor:
config:#
sensor outlet <n> <sensor type> assertionTimeout <as_value>
Variables:
<n> is the number of the outlet that you want to configure.
<sensor type> is one of the following sensor types:
Sensor type
Description
current Current
sensor
voltage Voltage
sensor
activePower Active
power
sensor
apparentPower
Apparent power sensor
powerFactor Power
factor
sensor
activeEnergy
Active energy sensor
lineFrequency Line
frequency sensor
Summary of Contents for PX3-1000 series
