Chapter 5: Introduction to PDU Components
113
Number Description
Cascading status, which can be one of the following:
No Cascading: This device's cascading mode is set to None. See
Setting
the Cascading Mode
(on page 231).
Network Bridge Enabled: This device's cascading mode is set to Bridging.
Its IP address is also displayed on this page.
Port Forwarding Master: This device's cascading mode is set to Port
Forwarding, and it is a master device.
Port Forwarding Slave: This device's cascading mode is set to Port
Forwarding, and it is a slave device.
Slave Connected: Indicates whether the presence of a slave device is
detected -
yes or no.
Cascade Position: Indicates the position of a slave device in the Port
Forwarding mode. 1 represents Slave 1, 2 represents Slave 2, and so
on.
A port forwarding slave device will also display the master device's
IP address on this page.
Summary of Contents for PX3-1000 series
