Chapter 8: Using the Command Line Interface
508
config:#
serverReachability modify <n> ipAddress <IP_host>
Enable or disable the ping monitoring feature for the device:
config:#
serverReachability modify <n> pingMonitoringEnabled <option>
Modify the number of successful pings for declaring
"Reachable":
config:#
serverReachability modify <n> numberOfSuccessfulPingsToEnable
<succ_number>
Modify the number of unsuccessful pings for declaring
"Unreachable":
config:#
serverReachability modify <n> numberOfUnsuccessfulPingsForFailure
<fail_number>
Modify the wait time after a successful ping:
config:#
serverReachability modify <n> waitTimeAfterSuccessfulPing
<succ_wait>
Modify the wait time after a unsuccessful ping:
config:#
serverReachability modify <n> waitTimeAfterUnsuccessfulPing
<fail_wait>
Modify the wait time before resuming pinging after declaring
"Unreachable":
config:#
serverReachability modify <n> waitTimeBeforeResumingPinging
<resume>
Modify the number of consecutive "Unreachable" declarations
before disabling the ping monitoring feature:
Summary of Contents for PX3-1000 series
