Raritan PX3-1000 series, User Manual

Page: 243 / 744

Chapter 6: Using the Web Interface
221
Field Description

Cascading Multiple PX3 Devices for Sharing
Ethernet Connectivity
(on page 38)

Setting the Cascading Mode (on page 231)
DNS Resolver
Reference Determine which IP address is used when the
DNS resolver returns both IPv4 and IPv6
addresses.

IPv4 Address: Use the IPv4 addresses.

IPv6 Address: Use the IPv6 addresses.
DNS Suffixes
(optional) Specify a DNS suffix name if needed.
First/Second/Third
DNS Server Manually specify static DNS server(s).

If any static DNS server is specified in these
fields, it will override the DHCP-assigned DNS
server.

If DHCP (or Automatic) is selected for
IPv4/IPv6 settings, and there are NO static
DNS servers specified, the PX3 will use
DHCP-assigned DNS servers.
IPv4/IPv6 Routes You need to configure these settings only when
your local network contains two subnets, and you
want PX3 to communicate with the other subnet.
If so, make sure IP forwarding has been enabled
in your network, and then you can click 'Add
Route' to add static routes.
See
Static Route Examples
(on page 227).
Ethernet Interface Settings
By default the Ethernet interface or ETH1/ETH2 interface for iX7
™
is
enabled.
Enable Interface:
Make sure the Ethernet interface is enabled, or all networking through
this interface fails. This setting is available in the ETHERNET (or
ETH1/ETH2) section, but not available in the BRIDGE section.