Chapter 6: Using the Web Interface
274
Event rule configuration illustration:
1.
Choose Device Settings > Event Rules >
.
2.
Click the Event field to select an event type.
<Any sub-event> means all events shown on the list.
<Any Numeric Sensor> means all numeric sensors of the PX3,
including internal and environmental sensors. <Any Numeric
Sensor> is especially useful if you want to receive the
notifications when any numeric sensor's readings pass through
a specific threshold.
3.
In this example, the Peripheral Device Slot is selected, which is
related to the environmental sensor packages. Then a sensor ID field
for this event type appears. Click this additional field to specify which
sensor should be the subject of this event.
4.
In this example, sensor ID 2 (Slot 2) is selected, which is a
temperature sensor. Then a new field for this sensor appears. Click
this field to specify the type of event(s) you want.
5.
In this example, Numeric Sensor is selected because we want to
select numeric-sensor-related event(s). Then a field for
numeric-sensor-related events appears. Click this field to select one
of the numeric-sensor-related events from the list.
Summary of Contents for PX3-1000 series
