Chapter 6: Using the Web Interface
183
State
Description
alarmed
The state sensor enters the abnormal state.
unavailable
The communication with the managed
sensor is lost.
-- OR --
DPX2, DPX3 or DX sensor packages are
upgrading their sensor firmware.
Note that for a contact closure sensor, the normal state depends on the
normal setting you have configured. Refer to the Environmental Sensors
Guide or Online Help for detailed information, which is available on
Raritan's
Support page
(
Managed actuator states:
State
Description
on
The actuator is turned on.
off
The actuator is turned off.
unavailable
The communication with the managed
actuator is lost.
-- OR --
DX sensor packages are upgrading their
sensor firmware.
Unmanaged sensor/actuator states:
State
Description
unmanaged
Sensors or actuators are physically connected
to the PX3 but not managed yet.
Note: Unmanaged sensors or actuators will disappear from the web
interface after they are no longer physically connected to the PX3. To
manage a sensor/actuator, go to
Peripherals
Summary of Contents for PX3-1000 series
