Chapter 8: Using the Command Line Interface
437
Setting the sysName Value
This command sets the SNMP MIB-II sysName value.
config:#
network services snmp sysName <value>
Variables:
<value> is a string comprising 0 to 255 alphanumeric characters.
Setting the sysLocation Value
This command sets the SNMP MIB-II sysLocation value.
config:#
network services snmp sysLocation <value>
Variables:
<value> is a string comprising 0 to 255 alphanumeric characters.
Changing the Modbus Configuration
You can enable or disable the Modbus agent, configure its read-only
capability, or change its TCP port.
A Modbus command begins with
network services modbus.
Enabling or Disabling Modbus
This command enables or disables the Modbus protocol.
config:#
network services modbus enabled <option>
Variables:
<option> is one of the options:
true or false.
Option
Description
true
The Modbus agent is enabled.
false
The Modbus agent is disabled.
Summary of Contents for PX3-1000 series
