Raritan PX3-1000 series, User Manual

Page: 519 / 744

Chapter 8: Using the Command Line Interface
497
config:# sensor inlet <n> <sensor type> lowerWarning <option>
Set the deassertion hysteresis for an inlet sensor:
config:# sensor inlet <n> <sensor type> hysteresis <hy_value>
Set the assertion timeout for an inlet sensor:
config:# sensor inlet <n> <sensor type> assertionTimeout <as_value>
Variables:

<n> is the number of the inlet that you want to configure. For a
single-inlet PDU, <n> is always the number 1.

<sensor type> is one of the following sensor types:
Sensor type Description
current Current sensor
peakCurrent Peak current sensor
voltage Voltage sensor
activePower Active power sensor
apparentPower Apparent power sensor
powerFactor Power factor sensor
activeEnergy Active energy sensor
unbalancedCurrent Unbalanced load sensor
lineFrequency Line frequency sensor
residualCurrent Residual current sensor
phaseAngle Inlet phase angle sensor
Note: If the requested sensor type is not supported, the "Sensor is
not available" message is displayed.

<option> is one of the options: enable, disable or a numeric value.
Option Description
enable Enables the specified threshold for a specific inlet
sensor.