Raritan PX3-1000 series, User Manual

Page: 542 / 744

Chapter 8: Using the Command Line Interface
520
Forcing the Device Detection Mode
This command forces the serial port on the PX3 to enter a specific device
detection mode.
config:# serial deviceDetectionType <mode>
Variables:

<mode> is one of the detection modes: automatic, forceConsole,
forceAnalogModem, or forceGsmModem.
Option Description
automatic The PX3 automatically detects the type of
the device connected to the serial port.
Select this option unless your PX3 cannot
correctly detect the device type.
forceConsole The PX3 attempts to recognize that the
connected device is set for the console
mode.
forceAnalogModem The PX3 attempts to recognize that the
connected device is an analog modem.
forceGsmModem The PX3 attempts to recognize that the
connected device is a GSM modem.
Example
The following command sets the CONSOLE baud rate of the PX3 device's
serial port to 9600 bps.
config:# serial consoleBaudRate 9600
Setting the History Buffer Length
This command syntax sets the history buffer length, which determines
the amount of history commands that can be retained in the buffer. The
default length is 25.
config:# history length <n>
Variables:

<n> is an integer number between 1 and 250.