Raritan PX3-1000 series, User Manual

Page: 171 / 744

Chapter 6: Using the Web Interface
149
Internal Beeper State
The PDU page indicates the internal beeper state.
Available beeper states:
States Description
Off The beeper is turned off.
The beeper is turned on. Active
"Activation Reason" is displayed, indicating why
the beeper sounds an alarm.
For example, if the beeper is turned on because of
a specific event rule "XXX," the activation reason
looks like:
Event Action triggered by rule: XXX
Scenarios when the beeper sounds an alarm:

Any overcurrent protector on the PX3, including fuses and circuit
breakers, has tripped or blown. See
Beeper
(on page 123).

You have set an event rule that turns on the internal beeper when a
specific event occurs, and that event occurs. See
Event Rules and
Actions (on page 272).

On the PX3 supporting residual current monitoring (RCM), the
beeper also sounds when there is an RCM alarm. See
PX3 Models
with Residual Current Monitoring
(on page 588).
Tip: To check the internal beeper state via CLI, see PDU Configuration
(on page 375).