Raritan PX3-1000 series, User Manual

Page: 397 / 744

Chapter 8: Using the Command Line Interface
375
Option Description
eth2 (PX3-iX7) Show the ETH2 interface's non-IP settings.
wireless Show the WIRELESS interface's non-IP settings.
bridge Show the BRIDGE interface's non-IP settings.
all Show the non-IP settings of all interfaces.
You can type the CLI command without the word
'all.' For example,
show network interface.
Network Service Settings
This command shows the network service settings only, including the
Telnet setting, TCP ports for HTTP, HTTPS, SSH and Modbus/TCP
services, and SNMP settings.
# show network services <option>
Variables:

<option> is one of the options:
all, http, https, telnet, ssh, snmp,
modbus and zeroconfig.
Option Description
all Displays the settings of all network services,
including HTTP, HTTPS, Telnet, SSH and SNMP.
Tip: You can also type the command without
adding this option "all" to get the same data.
http Only displays the TCP port for the HTTP service.
https Only displays the TCP port for the HTTPS service.
telnet Only displays the settings of the Telnet service.
ssh Only displays the settings of the SSH service.
snmp Only displays the SNMP settings.
modbus Only displays the settings of the Modbus/TCP
service.
zeroconfig Only displays the settings of the zero configuration
advertising.