Chapter 8: Using the Command Line Interface
443
Setting the Automatic Daylight Savings Time
This command determines whether the daylight savings time is applied
to the time settings.
config:#
time autoDST <option>
Variables:
<option> is one of the options:
enable or disable.
Mode
Description
enable
Daylight savings time is enabled.
disable
Daylight savings time is disabled.
Examples
This section illustrates several time configuration examples.
Example 1 - Time Setup Method
The following command sets the date and time settings by using the NTP
servers.
config:#
time method ntp
Example 2 - Primary NTP Server
The following command sets the primary time server to 192.168.80.66.
config:#
time ntp firstServer 192.168.80.66
Summary of Contents for PX3-1000 series
