Chapter 6: Using the Web Interface
160
PX3-1000 series does NOT support the following features.
To configure global outlet settings or perform the load-shedding
command:
1.
Click
to show a list of commands.
2.
Select the desired command. Note that only outlet-switching capable
models show the commands marked with * in the table.
Command
Refer to
*Sequence Setup
Setting Outlet Power-On Sequence
and Delay
(on page 162)
*Load Shedding Setup
Setting Non-Critical Outlets
(on
*Activate Load Shedding
-- OR--
*Deactivate Load Shedding
Load Shedding Mode
(on page 164)
To power control multiple outlets:
You can switch any outlet regardless of its current power state. That is,
you can turn on any outlet that is already turned on, or turn off any outlet
that is already turned off.
1.
Click
to make checkboxes appear in front of outlets.
Tip: To perform the desired action on only one outlet, you can simply
click that outlet without making the checkboxes appear.
2.
Select multiple outlets.
To select ALL outlets, select the topmost checkbox in the header
row.
3.
Click or select the desired button or command.
Summary of Contents for PX3-1000 series
