Raritan PX3-1000 series, User Manual

Page: 185 / 744

Chapter 6: Using the Web Interface
163
Next time when power cycling the PX3, it will turn on all outlets based on
the new outlet order.
The new order also applies when performing the power-on or
power-cycling operation on partial outlets.
To set a power-on delay for any outlet:
1. On the same outlets list, click the 'Delay' column of the outlet that
requires a wait after it is turned on.
2. Type a new value in seconds.
3. Click Save.
The PX3 will insert a power-on delay between the configured outlet and
the one following it during the power-on process.
Setting Non-Critical Outlets
Outlets that are turned off when load shedding is activated are called
non-critical. Outlets that are not affected by load shedding are called
critical outlets. See
Load Shedding Mode (on page 164).
Per default, all outlets are configured as critical.
To determine critical and non-critical outlets:
1. On the Outlets page, click > Load Shedding Setup.
2. To set non-critical outlets, select the checkboxes of those you want.

To select ALL outlets, select the topmost checkbox in the header
row.
3. To turn non-critical outlets into critical ones, deselect their
checkboxes.

To deselect ALL outlets, deselect the topmost checkbox in the
header row.
4. Click Save.
Tip: You can also set up non-critical outlet setting by configuring outlets
one by one. See
Individual Outlet Pages
(on page 165).