Chapter 6: Using the Web Interface
298
Syslog message
Send email
Send SMS message
a.
If no messaging actions are available, create them now. See
Available Actions
(on page 289).
b.
To select any methods, select them one by one in the Available
field.
To add all available methods, simply click Select All.
c.
To delete any methods, click a method's
in the Selected
field.
To remove all methods, simply click Deselect All.
4.
In the Available Sensors field, select the desired target's sensor.
a.
Click the first
to select a target component from the list.
b.
Click the second
to select the specific sensor for the target
from the list.
c.
Click
to add the selected sensor to the Report Sensors
list box.
For example, to monitor the current reading of the Inlet 1, select
Inlet 1 from the left field, and then select RMS Current from the right
field.
5.
To report additional sensors simultaneously, repeat the above step
to add more sensors.
To remove any sensor from the Report Sensors list box, select it
and click
. To make multiple selections, press Ctrl+click
or Shift+click to highlight multiple ones.
6.
To immediately send out the sensor report, click Send Report Now.
Summary of Contents for PX3-1000 series
