Chapter 6: Using the Web Interface
275
6.
In this example, 'Above upper critical threshold' is selected because
we want the PX3 to react only when the selected temperature
sensor's reading enters the upper critical range. A "Trigger
condition" field appears, requiring you to define the "exact" condition
related to the "upper critical" event.
7.
Select the desired radio button to finish the event configuration.
Refer to the following table for different types of radio buttons.
If needed, you may refer to event rule examples in the section
titled
Sample Event Rules
(on page 313).
8.
To select any action(s), select them one by one from the Available
Actions list.
To select all available actions, click Select All.
9.
To remove any action(s) from the Selected Actions field, click that
action's
.
To remove all actions, click Deselect All.
Summary of Contents for PX3-1000 series
