Raritan PX3-1000 series, User Manual, Page: 636 / 744

Appendix G: Old PX3 Character LCD Display
614
Environmental Sensor Information
The environmental sensor mode is displayed as "SENSOR" on the LCD
display. Basic information about a specific environmental sensor is
available, including the sensor's reading or state, X, Y, Z coordinates and
its serial number.
Below illustrates the environmental sensor information.
Number Example information
The selected target is the environmental sensor whose ID
number is 9 (SENSOR 9).
The selected environmental sensor's reading is 22 .
The word "MASTER" indicates the PX3 is the master
device in a cascading configuration.
For a slave device, it shows "SLAVE" instead.
Note: As of release 3.3.10, the "MASTER/SLAVE"
information is no longer available in the bridging mode,
but remains available in the port forwarding mode.
The measurement unit is (degrees in Celsius).
To display the environmental sensor information:
1. Press the MODE button until this product enters the Sensor mode,
as indicated by "SENSOR" at the top of the LCD display.
2. Press the Up or Down button until the desired environmental
sensor's ID number is displayed.
3. For example, "SENSOR 1" refers to the sensor #1 listed on the PX3
web interface.
4. The LCD display shows the reading or state of the selected sensor
in the middle of the LCD display.

When showing a numeric sensor's reading, the appropriate
measurement unit is displayed to the right of the reading.