Raritan PX3-1000 series, User Manual

Page: 225 / 744

Chapter 6: Using the Web Interface
203
Asset Strip Automatic Firmware Upgrade
After connecting the asset strip to the PX3, it automatically checks its
own firmware version against the version of the asset strip firmware
stored in the PX3 firmware. If two versions are different, the asset strip
automatically starts downloading the new firmware from the PX3 to
upgrade its own firmware.
During the firmware upgrade, the following events take place:

The asset strip is completely lit up, with the blinking LEDs cycling
through diverse colors.

A firmware upgrade process is indicated in the PX3 web interface.

An SNMP trap is sent to indicate the firmware upgrade event.
External Beeper
After connecting and detecting a supported external beeper, the PX3
shows 'External Beeper' in place of 'Feature Port' in the menu.
Note: For connection instructions, see
Connecting an External Beeper
(on page 83).
To open the External Beeper page, click it in the Menu (on page 132).
This page shows an external beeper's status, including:

Number of the FEATURE port where this external beeper is
connected

Its device type

Its connection status

The beeper's state - off or active
For the functionality of this icon on the top-right corner, see
Feature Port
(on page 193).