Chapter 6: Using the Web Interface
156
Inlet's power waveform, which is the same as
Dashboard - Inlet
History
(on page 142)
To customize the inlet's name:
1.
Click Edit Settings.
2.
Type a name for the inlet.
For example, you can name it to identify the power source.
3.
Click Save.
4.
The inlet's custom name is displayed on the Inlet or Dashboard page,
followed by its label in parentheses.
To reset the inlet's active energy counter:
Only users with the "Admin" role assigned can reset active energy
readings.
The energy reset feature per inlet is especially useful when your PX3 has
more than one inlet.
1.
Click
.
2.
Click Reset on the confirmation message.
This inlet's active energy reading is then reset to zero.
Tip: To reset ALL active energy counters on the PX3, see
PDU
(on page
To configure inlet thresholds:
1.
Click the Thresholds title bar at the bottom of the page to display
inlet thresholds.
Summary of Contents for PX3-1000 series
