Raritan PX3-1000 series, User Manual

Page: 473 / 744

Chapter 8: Using the Command Line Interface
451
After the Restricted Service Agreement feature is enabled, the
agreement's content is displayed in the login screen.
Do either of the following, or the login fails:

In the web interface, select the checkbox labeled "I understand and
accept the Restricted Service Agreement."
Tip: To select the agreement checkbox using the keyboard, first
press Tab to go to the checkbox and then Enter.

In the CLI, type
y
when the confirmation message "I understand and
accept the Restricted Service Agreement" is displayed.
Specifying the Agreement Contents
This command allows you to create or modify contents of the Restricted
Service Agreement.
config:# security restrictedServiceAgreement bannerContent
After performing the above command, do the following:
1. Type the text comprising up to 10,000 ASCII characters when the CLI
prompts you to enter the content.
2. To end the content:
a. Press Enter.
b. Type
--END--
to indicate the end of the content.
c. Press Enter again.
If the content is successfully entered, the CLI displays this message
"Successfully entered Restricted Service Agreement" followed by the
total number of entered characters in parentheses.
Note: The new content of Restricted Service Agreement is saved only
after typing the
apply
command. See Quitting Configuration Mode (on
page 404).
Example
The following example illustrates how to specify the content of the
Restricted Service Agreement.
1. Type the following command and press Enter to start entering the
content.
config:# security restrictedServiceAgreement bannerContent
2. Type the following content when the CLI prompts you to enter the
content.