Raritan PX3-1000 series, User Manual

Page: 264 / 744

Chapter 6: Using the Web Interface
242
a. Click the Download MIBs title bar to show the download links.
b. Click the PDU2-MIB download link. See
Downloading SNMP
MIB (on page 360).
6. Click Save.
Configuring SMTP Settings
The PX3 can be configured to send alerts or event messages to a specific
administrator by email. See
Event Rules and Actions
(on page 272).
To send emails, you have to configure the SMTP settings and enter an IP
address for your SMTP server and a sender's email address.
If any email messages fail to be sent successfully, the failure event and
reason are available in the event log. See
Viewing or Clearing the Local
Event Log
(on page 339).
To set SMTP server settings:
1. Choose Device Settings > Network Services > SMTP Server.
2. Enter the information needed.
Field Description
Server Name Type the name or IP address of the mail server.
Port Type the port number.

Default is 25
Sender Email
Address Type an email address for the sender.
Number of Sending
Retries Type the number of email retries.

Default is 2 retries
Time Between
Sending Retries Type the interval between email retries in
minutes.

Default is 2 minutes.
Server Requires
Authentication Select this checkbox if your SMTP server requires
password authentication.