Raritan PX3-1000 series, User Manual, Page: 427 / 744

Chapter 8: Using the Command Line Interface
405
"apply" command before closing the terminal emulation program.
Closing the program does not save any configuration changes. See
Quitting Configuration Mode (on page 404).
Quitting Configuration Mode
Both of "apply" and "cancel" commands let you quit the configuration
mode. The difference is that "apply" saves all changes you made in the
configuration mode while "cancel" aborts all changes.
To quit the configuration mode, use either command:
config:# apply
-- OR --
config:# cancel
The # or > prompt appears after pressing Enter, indicating that you have
entered the administrator or user mode. See
Different CLI Modes and
Prompts (on page 368).
PDU Configuration Commands
A PDU configuration command begins with
pdu. You can use the PDU
configuration commands to change the settings that apply to the whole
PX3 device.
Changing the PDU Name
This command changes the PX3 device's name.
config:# pdu name "<name>"
Variables:

<name> is a string comprising up to 32 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.