Chapter 2: Rackmount, Inlet and Outlet Connections
20
2.
Install the cable retention clip by inserting two ends of the clip into
the tiny holes.
3.
Plug the power cord into the outlet, and press the clip toward the
power cord until it holds the cord firmly. The clip's central part
holding the plug should face downwards toward the ground, like an
inverted "U". This allows gravity to keep the clip in place.
4.
Repeat the same steps to install clips and power cords on the other
outlets.
Locking Outlets and Cords
In addition to the cable retention clips, Raritan also provides other
approaches to secure the connection of the power cords from your IT
equipment to the Raritan PDUs, including:
SecureLock
™
outlets and cords
Button-type locking outlets
Note that NOT all Raritan PDUs are implemented with any of the above
locking outlets.
Summary of Contents for PX3-1000 series
