Raritan PX3-1000 series, User Manual

Page: 246 / 744

Chapter 6: Using the Web Interface
224

Available settings for the CA Certificate:
Field/setting Description
Enable verification
of TLS certificate
chain Select this checkbox for the PX3 to verify the
validity of the TLS certificate that will be installed.

For example, the PX3 will check the
certificate's validity period against the system
time.
Click this button to install a certificate file. Then
you can:

Click Show to view the certificate's content.

Click Remove to delete the installed certificate
if it is inappropriate.
Allow expired and
not yet valid
certificates

Select this checkbox to make the
authentication succeed regardless of the
certificate's validity period.

After deselecting this checkbox, the
authentication fails whenever any certificate in
the selected certificate chain is outdated or not
valid yet.
Allow wireless
connection if
system clock is
incorrect When this checkbox is deselected, and if the
system time is incorrect, the installed TLS
certificate is considered not valid yet and will
cause the wireless network connection to fail.
When this checkbox is selected, it will make the
wireless network connection successful when the
PX3 system time is earlier than the firmware build
before synchronizing with any NTP server.

The incorrect system time issue may occur
when the PX3 has once been powered off for a
long time.
IPv4 settings:
Field/setting Description
Enable IPv4 Enable or disable the IPv4 protocol.
IP Auto
Configuration Select the method to configure IPv4 settings.

DHCP: Auto-configure IPv4 settings via DHCP
servers.

Static: Manually configure the IPv4 settings.